Proactive insights, news and tips from Oracle WebLogic Server Support. Learn Oracle from Oracle.

Running WebLogic on OpenShift

Mark Nelson

In this post I am going to walk through setting up and using WebLogic on OpenShift, using the Oracle WebLogic Kubernetes Operator. My starting point is the OpenShift Container Platform server that I set up on OCI in this earlier post.

I am going to use the operator to manage my domains in OpenShift. The operator pattern is common in Kubernetes for managing complex software products that have special lifecycle requirements, different to the base assumptions made by Kubernetes. For example, when there is state in a pod that needs to be saved or migrated before terminating a pod. The WebLogic Kubernetes operator includes such built-in knowledge of WebLogic, so it greatly simplifies the management of WebLogic in a Kubernetes environment. Plus it is completely open source and supported by Oracle.


Here is an overview of the process I am going to walk through:

  • Create a new project (namespace) where I will be deploying WebLogic,
  • Prepare the project for the WebLogic Kubernetes Operator,
  • Install the operator,
  • View the operator logs in Kibana,
  • Prepare Docker images to run my domain,
  • Create the WebLogic domain,
  • Verify access to the WebLogic administration console and WLST,
  • Deploy a test application into the cluster,
  • Set up a route to expose the application publicly,
  • Test scaling and load balancing, and
  • Install the WebLogic Exporter to get metrics into Prometheus.

Before we get started, you should clone the WebLogic operator project from GitHub. It contains many of the samples and helpers we will need.

git clone https://github.com/oracle/weblogic-kubernetes-operator

Create a new project (namespace)

In the OpenShift web user interface, create a new project. If you already have other projects, go to the Application Console, and then click on the project pulldown at the top and click on “View All Projects” and then the “Create Project” button. If you don’t have existing projects, OpenShift will take you right to the create project page when you log in. I called my project “weblogic” as you can see in the image below:

Creating a new project

Creating a new project

Then navigate into your project view. Right now it will be empty, as shown below:

The new 'weblogic' project

The new “weblogic” project

Prepare the project for the WebLogic Kubernetes Operator

The easiest way to get the operator Docker image is to just pull it from the Docker Hub. You can review details of the image in the Docker Hub.

The WebLogic Kubernetes Operator in the Docker Hub

The WebLogic Kubernetes Operator in the Docker Hub

You can use the following command to pull the image. You may need to docker login first if you have not previously done so:

docker pull oracle/weblogic-kubernetes-operator:2.0

Instead of pulling the image and manually copying it onto our OpenShift nodes, we could also just add an Image Pull Secret to our project (namespace) so that OpenShift will be able to pull the image for us. We can do this with the following commands (at this stage we are using a user with the cluster-admin role):

oc project weblogic
oc create secret docker-registry docker-store-secret \
   --docker-server=store.docker.com \
   --docker-username=DOCKER_USER \
   --docker-password=DOCKER_PASSWORD \

In this command, replace DOCKER_USER with your Docker store userid, DOCKER_PASSWORD with your password, and DOCKER_EMAIL with the email address associated with your Docker Hub account.

We also need to tell OpenShift to link this secret to our service account. Assuming we want to use the default service account in our weblogic project (namespace), we can run this command:

oc secrets link default docker-store-secret --for=pull

(Optional) Build the image yourself

It is also possible to build the image yourself, rather than pulling it from Docker Hub. If you want to do that, first go to Docker Hub and accept the license for the Server JRE image, ensure you have the listed prerequisites installed, and then run these commands:

mvn clean install 
docker build -t weblogic-kubernetes-operator:2.0 --build-arg VERSION=2.0 .

Install the Elastic stack

The operator can optionally send its logs to Elasticsearch and Kibana. This provides a nice way to view the logs, and to search and filter and so on, so let’s install this too.

A sample YAML file is provided in the project to install them:


Edit this file to set the namespace to “weblogic” for each deployment and service (i.e. on lines 30, 55, 74 and 98 - just search for namespace) and then install them using this command:

oc apply -f kubernetes/samples/scripts/elasticsearch-and-kibana/elasticsearch_and_kibana.yaml

After a few moments, you should see the pods running in our namespace:

oc get pods,services
NAME                                 READY     STATUS    RESTARTS   AGE
pod/elasticsearch-75b6f589cb-c9hbw   1/1       Running   0          10s
pod/kibana-746cc75444-nt8pr          1/1       Running   0          10s

NAME                    TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)             AGE
service/elasticsearch   ClusterIP   <none>        9200/TCP,9300/TCP   10s
service/kibana          NodePort    <none>        5601:32394/TCP      10s

So based on the service shown above and our project (namespace) named weblogic, the URL for Elasticsearch will be elasticsearch.weblogic.svc.cluster.local:9200. We will need this URL later.

Install the operator

Now we are ready to install the operator. In the 2.0 release, we use Helm to install the operator. So first we need to download Helm and set up Tiller on our OpenShift cluster (if you have not already installed it).

Helm provide installation instructions on their site. I just downloaded the latest release, unzipped it, and made helm executable.

Before we install Tiller, let’s create a cluster role binding to make sure the default service account in the kube-system namespace (which tiller will run under) has the cluster-admin role, which it will need to install and manage the operation.

cat << EOF | oc apply -f -
apiVersion: authorization.openshift.io/v1
kind: ClusterRoleBinding
  name: tiller-cluster-admin
  name: cluster-admin
- kind: ServiceAccount
  name: default
  namespace: kube-system
- system:serviceaccount:kube-system:default

Now we can execute helm init to install tiller on the OpenShift cluster. Check it was successful with this command:

oc get deploy -n kube-system
NAME                         DESIRED   CURRENT   UP-TO-DATE   AVAILABLE   AGE
tiller-deploy                1         1         1            1           18s

When you install the operator you can either pass the configuration parameters into Helm on the command line, or if you prefer, you can store them in a YAML file and pass that file in. I like to store them in a file. There is a sample provided, so we can just make a copy and update it with our details.

cp kubernetes/charts/weblogic-operator/values.yaml my-operator-values.yaml

Here are the updates we need to make:

  • Set the domainNamespaces parameter to include just weblogic, i.e. the project (namespace) that we created to install WebLogic in.
domainNamespaces: - “weblogic”
  • Set the image parameter to match the name of the image you pulled from Docker Hub or built yourself. If you just create the image pull secret then use the value I have shown here:
# image specifies the docker image containing the operator code.
image: “oracle/weblogic-kubernetes-operator:2.0”
  • Set the imagePullSecrets list to include the secret we created earlier. If you did not create the secret you can leave this commented out.
- name: “docker-store-secret”
  • Set the elkIntegrationEnabled parameter to true.
# elkIntegrationEnabled specifies whether or not Elastic integration is enabled.
elkIntegrationEnabled: true
  • Set the elasticSearchHost to the address of the Elasticsearch server that we set up earlier.
# elasticSearchHost specifies the hostname of where elasticsearch is running.
# This parameter is ignored if 'elkIntegrationEnabled' is false.
elasticSearchHost: “elasticsearch.weblogic.svc.cluster.local”

Now we can use helm to install the operator with this command. Notice that I pass in the name of my parameters YAML file in the --values option:

helm install kubernetes/charts/weblogic-operator \
     --name weblogic-operator \
     --namespace weblogic \
     --values my-operator-values.yaml \

This command will wait until the operator starts up successfully. If it has to pull the image, that will obviously take a little while, but if this command does not finish in a minute or so, then it is probably stuck. You can send it to the background and start looking around to see what went wrong. Most often it will be a problem pulling the image. If you see the pod has status ImagePullBackOff then OpenShift was not able to pull the image.

You can verify the pod was created with this command:

oc get pods
NAME                                READY     STATUS    RESTARTS   AGE
elasticsearch-75b6f589cb-c9hbw      1/1       Running   0          2h
kibana-746cc75444-nt8pr             1/1       Running   0          2h
weblogic-operator-54d99679f-dkg65   1/1       Running   0          48s

View the operator logs in Kibana

Now we have the operator running, let's take a look at the logs in Kibana. We installed Kibana earlier. Let's expose Kibana outside our cluster:

oc expose service kibana
route.route.openshift.io/kibana exposed

You can check this worked with these commands:

oc get routes
NAME      HOST/PORT                                                      PATH      SERVICES   PORT      TERMINATION   WILDCARD
kibana    kibana-weblogic.sub11201828382.certificationvc.oraclevcn.com             kibana     5601                    None

oc get services
NAME                             TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)             AGE
elasticsearch                    ClusterIP   <none>        9200/TCP,9300/TCP   2h
internal-weblogic-operator-svc   ClusterIP   <none>        8082/TCP            7m
kibana                           NodePort    <none>        5601:32394/TCP      2h

Now you should be able to access Kibana using the OpenShift front-end address and the node port for the Kibana service. In my case the node port is 32394 and my OpenShift server is accessible to me as openshift so I would use the address https://openshift:32394.

You will see a page like this one:

The initial Kibana page

The initial Kibana page

Click on the “Create” button, then click on the "Discover" option in the menu on the left hand side. Now hover over the entries for level and log in the field list, and click on the "Add" button that appears next to each one.

Now you should have a nice log screen like this:

The operator logs in Kibana

The operator logs in Kibana

Great! We have the operator installed. Now we are ready to move on to create some WebLogic domains.

Prepare Docker images to run the domain

Now we have some choices to make. There are two main ways to run WebLogic in Docker - we can use a standard Docker image which contains the WebLogic binaries but keep the domain configuration, applications, etc., outside the image, for example in a persistent volume; or we can create Docker images with both the WebLogic binaries and the domain burnt into them. There are advantages and disadvantages to both approaches, so it really depends on how we want to treat our domain.

The first approach is good if you just want to run WebLogic in Kubernetes but you still want to use the admin console and WLST and so on to manage it. The second approach is better if you want to drive everything from a CI/CD pipeline where you do not mutate the running environment, but instead you update the source and then build new images and roll the environment to uptake them. A number of these kinds of considerations are listed here.

For the sake of this post, let's use the "domain in image" option (the second approach).

So we will need a base WebLogic image with the necessary patches installed, and then we will create our domain on top of that. Let's create a domain with a web application deployed in it, so that we have something to use to test our load balancing configuration and scaling later on.

The easiest way to get the base image is to grab it from Oracle using this command:

docker pull store/oracle/weblogic:

The standard WebLogic Server image from Docker Hub has the necessary patches already installed. It is worth knowing how to install patches, in case you need some additional one-off patches. If you are not interested in that, skip forward to here.

(Optional) Manually creating a patched WebLogic image

Here is an example Dockerfile that we can use to install the necessary patches. You can modify this to add any additional one-off patches that you need. Follow that pattern already there to copy the patch into the container, apply it, and then remove the temporary files after you are done.

# ---------------------------------------------
# Install patches to run WebLogic on Kubernetes
# ---------------------------------------------

# Start with an unpatched WebLogic Docker image
FROM your/weblogic-image:

MAINTAINER Mark Nelson <mark.x.nelson@oracle.com>

# We need patch 29135930 to run WebLogic on Kubernetes
# We will also also install the latest PSU which is 28298734
# That prereqs a newer version of OPatch, which is provided by 28186730

ENV PATCH_PKG0="p28186730_139400_Generic.zip"
ENV PATCH_PKG2="p28298734_122130_Generic.zip"
ENV PATCH_PKG3="p29135930_12213181016_Generic.zip"

# Copy the patches into the container

# Install the psmisc package which is a prereq for 28186730
USER root
RUN yum -y install psmisc

# Install the three patches we need - do it all in one command to
# minimize the number of layers and the size of the resulting image.
# Also run opatch cleanup and remove temporary files.
USER oracle
RUN cd /u01 && \
    $JAVA_HOME/bin/jar xf /u01/$PATCH_PKG0 && \
    $JAVA_HOME/bin/java -jar /u01/6880880/opatch_generic.jar \
        -silent oracle_home=/u01/oracle -ignoreSysPrereqs && \
    echo "opatch updated" && \
    sleep 5 && \
    cd /u01 && \
    $JAVA_HOME/bin/jar xf /u01/$PATCH_PKG2 && \
    cd /u01/28298734 && \
    $ORACLE_HOME/OPatch/opatch apply -silent && \
    cd /u01 && \
    $JAVA_HOME/bin/jar xf /u01/$PATCH_PKG3 && \
    cd /u01/29135930 && \
    $ORACLE_HOME/OPatch/opatch apply -silent && \
    $ORACLE_HOME/OPatch/opatch util cleanup -silent && \
    rm /u01/$PATCH_PKG0 && \
    rm /u01/$PATCH_PKG2 && \
    rm /u01/$PATCH_PKG3 && \
    rm -rf /u01/6880880 && \
    rm -rf /u01/28298734 && \
    rm -rf /u01/29135930 


CMD ["/u01/oracle/createAndStartEmptyDomain.sh"]

This Dockerfile assumes the patch archives are available in the same directory. You would need to download the patches from My Oracle Support and then you can build the image with this command:

docker build -t my-weblogic-base-image: .

Creating the image with the domain in it

I am going to use the WebLogic Deploy Tooling to define my domain. If you are not familiar with this tool, you might want to check it out! It lets you define your domain declaratively instead of writing custom WLST scripts. For just one domain, maybe not such a big deal, but if you need to create a lot of domains it is pretty useful. It also lets you parameterize them, and it can introspect existing domains to create a model and associated artifacts. You can also use it to "move" domains from place to place, say from an on-premises install to Kubernetes, and you can change the version of WebLogic on the way without needing to worry about differences in WLST from version to version - it takes care of all that for you. Of course, we don't need all those features for what we need to do here, but it is good to know they are there for when you might need them!

I created a GitHub repository with my domain model here. You can just clone this repository and then run the commands below to download the WebLogic Deploy Tooling and then build the domain in a new Docker image that we will tag my-domain1-image:1.0:

git clone https://github.com/markxnelson/simple-sample-domain
cd simple-sample-domain
curl -Lo weblogic-deploy.zip https://github.com/oracle/weblogic-deploy-tooling/releases/download/weblogic-deploy-tooling-0.14/weblogic-deploy.zip
# make sure JAVA_HOME is set correctly, and `mvn` is on your PATH

I won't go into all the nitty gritty details of how this works, that's a subject for another post (if you are interested, take a look at the documentation in the GitHub project), but take a look at the simple-toplogy.yaml file to get a feel for what is happening:

    AdminUserName: '@@FILE:/u01/oracle/properties/adminuser.properties@@'
    AdminPassword: '@@FILE:/u01/oracle/properties/adminpass.properties@@'
    Name: '@@PROP:DOMAIN_NAME@@'
    AdminServerName: '@@PROP:ADMIN_NAME@@'
    ProductionModeEnabled: '@@PROP:PRODUCTION_MODE_ENABLED@@'
        FileName: '@@PROP:DOMAIN_NAME@@.log'
                ServerTemplate: '@@PROP:CLUSTER_NAME@@-template'
                CalculatedListenPorts: false
                ServerNamePrefix: '@@PROP:MANAGED_SERVER_NAME_BASE@@'
                DynamicClusterSize: '@@PROP:CONFIGURED_MANAGED_SERVER_COUNT@@'
                MaxDynamicClusterSize: '@@PROP:CONFIGURED_MANAGED_SERVER_COUNT@@'
            ListenPort: '@@PROP:ADMIN_PORT@@'
                    ListenPort: '@@PROP:T3_CHANNEL_PORT@@'
                    PublicAddress: '@@PROP:T3_PUBLIC_ADDRESS@@'
                    PublicPort: '@@PROP:T3_CHANNEL_PORT@@'
            ListenPort: '@@PROP:MANAGED_SERVER_PORT@@'
            Cluster: '@@PROP:CLUSTER_NAME@@'
        # Quote needed because of hyphen in string
            SourcePath: 'wlsdeploy/applications/test-webapp.war'
            Target: '@@PROP:CLUSTER_NAME@@'
            ModuleType: war
            StagingMode: nostage
            PlanStagingMode: nostage

As you can see it is all parameterized. Most of those properties are defined in properties/docker-build/domain.properties:

# These variables are used for substitution in the WDT model file.
# Any port that will be exposed through Docker is put in this file.
# The sample Dockerfile will get the ports from this file and not the WDT model.

On lines 10-17 we are defining a cluster named cluster-1 with two dynamic servers in it. On 18-25 we are defining the admin server. And on 30-38 we are defining an application that we want deployed. This is a simple web application that prints out the IP address of the managed server it is running on. Here is the main page of that application:

<%@ page import="java.net.UnknownHostException" %>
<%@ page import="java.net.InetAddress" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE html>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <c:url value="/res/styles.css" var="stylesURL"/>
    <link rel="stylesheet" href="${stylesURL}" type="text/css">
    <title>Test WebApp</title>
      String hostname, serverAddress;
      hostname = "error";
      serverAddress = "error";
      try {
        InetAddress inetAddress;
        inetAddress = InetAddress.getLocalHost();
        hostname = inetAddress.getHostName();
        serverAddress = inetAddress.toString();
      } catch (UnknownHostException e) {


    <li>InetAddress: <%=serverAddress %>
    <li>InetAddress.hostname: <%=hostname %>


The source code for the web application is in the test-webapp directory. We will use this application later to verify that scaling and load balancing is working as we expect.

So now we have a Docker image with our custom domain in it, and the WebLogic Server binaries and the patches we need. So we are ready to deploy it!

Create the WebLogic domain

First, we need to create a Kubernetes secret with the WebLogic credentials in it. This is used by the operator to start the domain. You can use the sample provided here to create the secret:

./create-weblogic-credentials.sh \
   -u weblogic \
   -p welcome1 \
   -d domain1 \
   -n weblogic

Next, we need to create the domain custom resource. To do this, we prepare a Kubernetes YAML file as follows. I have removed the comments to make this more readable, you can find a sample here which has extensive comments to explain how to create these files:

apiVersion: "weblogic.oracle/v2"
kind: Domain
  name: domain1
  namespace: weblogic
    weblogic.resourceVersion: domain-v2
    weblogic.domainUID: domain1
  domainHome: /u01/oracle/user_projects/domains/domain1
  domainHomeInImage: true
  image: "my-domain1-image:1.0"
  imagePullPolicy: "IfNotPresent"
    name: domain1-weblogic-credentials
  includeServerOutInPodLog: true
  serverStartPolicy: "IF_NEEDED"
      openshift.io/scc: anyuid
    - name: JAVA_OPTIONS
      value: "-Dweblogic.StdoutDebugEnabled=false"
    - name: USER_MEM_ARGS
      value: "-Xms64m -Xmx256m "
    serverStartState: "RUNNING"
       - channelName: default
         nodePort: 30701
       - channelName: T3Channel
  - clusterName: cluster-1
    serverStartState: "RUNNING"
    replicas: 2

Now we can use this file to create the domain custom resource, using the following command:

oc apply -f domain.yaml

You can verify it was created, and view the resource that was created with these commands:

oc get domains
oc describe domain domain1

The operator will notice this new domain custom resource and it will react accordingly. In this case, since we have asked for the admin server and the servers in the the cluster to come to the "RUNNING" state (in lines 27 and 25 above) the operator will start up the admin server first, and then both managed servers. You can watch this happen using this command:

oc get pods -w

This will print out the current pods, and then update every time there is a change in status. You can hit Ctrl-C to exit from the command when you have seen enough.

The operator also creates services for the admin server, each managed server and the cluster. You can see the services with this command:

oc get services

You will notice a service called domain1-admin-server-external which is used to expose the admin server's default channel outside of the cluster, to allow us to access the admin console and to use WLST. We need to tell OpenShift to make this service available externally by creating a route with this command:

oc expose service domain1-admin-server-external --port=default

This will expose that service on the NodePort it declared.

Verify access to the WebLogic administration console and WLST

Now you can start a browser and point it to any one of your worker nodes and use the NodePort from the service (30701 in the example above) to access the admin console. For me, since I have an entry in my /etc/hosts for my OpenShift server, this address is http://openshift:30701/console.

You can log in to the admin console and use it as normal. You might like to navigate into "Deployments" to verify that our web application is there:

Viewing the test application in the WebLogic admin console

Viewing the test application in the WebLogic admin console

You might also like to go to the "Server" page to validate that you can see all of the managed servers:

Viewing the managed servers in the WebLogic admin console

Viewing the managed servers in the WebLogic admin console

We can also use WLST against the domain, if desired. To do this, just start up WLST as normal on your client machine and then use the OpenShift server address and the NodePort to form the t3 URL. Using the example above, my URL is t3://openshift:30701:


Initializing WebLogic Scripting Tool (WLST) ...

Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.

Welcome to WebLogic Server Administration Scripting Shell

Type help() for help on available commands

wls:/offline> connect('weblogic','welcome1','t3://openshift:30701')
Connecting to t3://openshift:30701 with userid weblogic ...
Successfully connected to Admin Server "admin-server" that belongs to domain "domain1".

Warning: An insecure protocol was used to connect to the server.
To ensure on-the-wire security, the SSL port or Admin port should be used instead.

wls:/domain1/serverConfig/> ls('Servers')
dr--   admin-server
dr--   managed-server-1
dr--   managed-server-2


You can use WLST as normal, either interactively, or you can run scripts. Keep in mind though, that since you have your domain burnt into the image, when you restart the pods, any changes you made with WLST would be lost. If you want to make permanent changes, you would need to include the WLST scripts in the image building process and then re-run it to build a new version of the image.

Of course, if you have chosen to put your domain in peristent storage instead of burning it into the image, this caveat would not apply.

Set up a route to expose the application publicly

Now, let's expose our web application outside the OpenShift cluster. To do this, we are going to want to set up a load balancer to distribute requests across all of the managed servers, and then expose the load balancer endpoint.

We can use the provided sample to install the Traefik load balancer using the following command:

helm install stable/traefik \
     --name traefik-operator \
     --namespace traefik \
     --values kubernetes/samples/charts/traefik/values.yaml  \
     --set "kubernetes.namespaces={traefik,weblogic}" \

Make sure you include the weblogic namespace so the Traefik ingress controller knows to load balance ingresses in our namespace.

Next, we need to create the ingress object. We can also do this with the provided sample using this command:

helm install kubernetes/samples/charts/ingress-per-domain \
     --name domain1-ingress \
     --namespace weblogic \
     --set wlsDomain.domainUID=domain1 \
     --set traefik.hostname=domain1.org

Note that you would set the hostname to your real DNS hostname when you do this for real. In this example, I am just using a made up hostname.

Test scaling and load balancing

Now we can hit the web application to verify the load balancing is working. You can hit it from a browser, but in that case session affinity will kick in, so you will likely see a response from the same managed server over and over again. If you use curl though, you should see it round robin.

You can run curl in a loop using this command:

while true
  sleep 2
  curl -v -H 'host: domain1.org' http://openshift:30305/testwebapp/

The web application just prints out the name and IP address of the managed server. So you should see the output alternate between all of the managed servers in sequence.

Now, let's scale the cluster down and see what happens. To initiate scaling, we can just edit the domain custom resource with this command:

oc edit domain domain1

This will open the domain custom resource in an editor. Find the entry for cluster-1 and underneath that the replicas entry:

  - clusterName: cluster-1
      annotations: {}
      labels: {}
    replicas: 4

You can change the replicas to another value, for example 2, and then save and exit. The operator will notice this change and will react by gracefully shutting down two of the managed servers. You can watch this happen with the command:

oc get pods -w

You will also notice in the other window where you have curl running that those two managed servers no longer get requests. You will also notice that there are not failed requests - the servers are removed from the domain1-cluster-cluster-1 service early so they will not receive requests and lead to a connection refused or timeout. The ingress and the load balancer automatically adjust.

Once the scaling is finished, you might want to scale back up to 4 and watch the operation in reverse.


Well at this point we have our custom WebLogic domain, with our own configuration and applications deployed, running on OpenShift under the control of the operator. We have seen how we can access the admin console, how to use WSLT, how to set up load balancing and expose applications outside the OpenShift cluster, and how to control scaling.

Here are a few screenshots from the OpenShift console showing what we have done:

The overview page

The overview page

Drilling down to the admin server pod

Drilling down to the admin server pod

The monitroing page

The monitoring page

Join the discussion

Comments ( 2 )
  • Rolando Carrasco Thursday, September 26, 2019
    Very good article. I managed to do most of the steps on top of minishift, but got stucked when doing the oc apply -f domain.yaml, because the introspect domain job kept telling me this:
    @[2019-09-26T13:32:08.803 UTC][introspectDomain.sh:74][SEVERE] Missing DOMAIN_HOME directory '/u01/oracle/user_projects/domains/domain1'.

    But the docker image was created properly, the variables were pointing to the right paths, etc.

    Any suggestion?
    best regards
  • Rolando Carrasco Thursday, September 26, 2019
    I solved the issue of the missing path for domain1 (previous comment). But now the nodemanager could not started:
    @[2019-09-26T14:15:07.813 UTC][startNodeManager.sh:322][SEVERE] Node manager failed to start within 60 seconds.

    I am looking for a solution, in case I find something, will post it here.
    Thank u
Please enter your name.Please provide a valid email address.Please enter a comment.CAPTCHA challenge response provided was incorrect. Please try again.