Folks, when late last year we announced support for Solaris Cluster in LDoms I/O domains on this blog entry
, we also hinted about support for LDoms guest domains. It has taken a bit longer then we envisaged, but i am pleased to report that SC Marketing has just announced support for LDoms guest domains with Solaris Cluster!!
So, what exactly does "support" mean here? It means that you can create a LDoms guest domain running Solaris, and then treat that guest domain as a cluster node by installing SC software (specific version and patch information noted later in the blog) inside the guest domain and have the SC software work with the virtual devices in the guest domain. The technically inclined reader would, at this point, have several questions pop into his head... How exactly does SC work with virtual devices? What do i have to do to make SC recognize these devices? Are there any differences between how SC is configured in LDoms guest domains, vs non-virtualized environments? Read-on below for a high level summary of specifics: For shared storage devices (i.e. those accessible from multiple cluster nodes), the virtual device must be backed by a full SCSI LUN. That means, no file backed virtual devices, no slices, no volumes. This limitation is required because SC needs advanced features in the storage devices to guarantee data integrity and those features are available only for virtual storage devices backed by full SCSI LUNs. One may need to use storage which is unshared (ie is accessed from only one cluster node), for things such as OS image installation for the guest domain. For such usage, any type of virtual devices can be used, including those backed by files in the I/O domain. However, for such virtual devices, make sure to configure them to be synchronous. Check LDoms documentation and release notes on how to do that. Currently (as of July 2008) one needs to add "set vds:vd_file_write_flags = 0" to the /etc/system file in the I/O domain exporting the file. This is required because the Cluster stores some key configuration information on the root filesystem (in /etc/cluster) and it expects that the information written to this location is written synchronously to the disks. If the root filesystem of the guest domain is on a file in the I/O domain, it needs this setting to be synchronous. Network based storage (NAS etc.) is fine when used from within the guest domain. Check cluster support matrix for specifics. LDoms guest domains don't change this support. For cluster private interconnect, the LDoms virtual device "vnet" can be used just fine, however the virtual switch which it maps must have the option "mode=sc" specified for it. So essentially, for the command ldm subcommand add-vsw, you would add another argument "mode=sc" on the command line while creating the virtual switch which would be used for cluster private interconnect inside the guest domains. This option enables a fastpath in the I/O domain for the Cluster heartbeat packets so that those packets do not compete with application network packets in the I/O domain for resources. This greatly improves the reliability of the Cluster heartbeats, even under heavy load, leading to a very stable cluster membership for applications to work with. Note however, that good engineering practices should still be followed while sizing your server resources (both in the I/O domain as well as in the guest domains) for the application load expected on the system. With this announcement all features of Solaris Cluster supported in non-virtualized environments are supported in LDoms guest domains, unless explicitly noted in the SC release notes. Some limitations come from LDoms themselves, such as lack of jumbo frame support over virtual networks or lack of link based failure detection with IPMP in guest domains. Check LDoms documentation and release notes for such limitations as support for such missing features are improving all the time. For support of specific applications with LDoms guest domains and SC, check with your ISV. Support for applications in LDoms guest domains is improving all the time, so check often. Software version requirements. LDoms_1.0.3 or higher, S10U5 and patches 137111-01, 137042-01, 138042-02, and 138056-01 or higher are required in BOTH the LDoms guest domains as well as in the I/O domains exporting virtual devices to the guest domains. Solaris Cluster SC32U1 (3.2 2/08) with patch 126106-15 or higher is required in the LDoms guest domains. Licensing for SC in LDoms guest domains follows the same model as those for the I/O domains. You basically pay for the physical server, irrespective of how many guest domains and I/O domains are deployed in that physical server.
This covers the high level overview of how SC is to be deployed inside the LDoms guest domains. Check out the SC Release notes
for additional details, and some sample configurations. The whole virtualization space is evolving very rapidly and new developments are happening ever so quickly. Keep this blog page bookmarked and visit it frequently to find out how Solaris Cluster is evolving along with this space.
Solaris Cluster Engineering