Prepping the Raspberry Pi for Java Excellence (part 1)
By MarkHeckler-Oracle on Nov 25, 2012
I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing.
I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks:
- Load an OS onto an SD card
- Get the Pi connected to the network
- Load a JDK
I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly.
There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac):
- Plug SD card into reader on/in Mac
- Format it (FAT32)
- Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card)
- Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m)
- Eject the card from the Mac (diskutil eject diskn)
There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi.
Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one!
Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least there was for my combination of Pi version, OS version, and uncanny gift of timing and luck. :-)
Here is the sequence of steps I used to make the magic happen:
- Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity)
- Boot your Pi. On the first boot, do the following things:
- Opt to have it use all space on the SD card (will require a reboot eventually)
- Disable overscan
- Set your timezone
- Enable the ssh server
- Update raspi-config
- Reboot your Pi. This will reconfigure the SD to use all space (see above).
- After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved. ;-)
- With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration.
To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself!
I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time!
All the best,