Saturday Oct 23, 2010

Healthcare Enterprise – IT Architecture Building Blocks - Canonical Message Model for a HL7 Enterprise

In any but the simplest of HL7 messaging environments there will be multiple sources and multiple destinations of HL7 messages. It is very unlikely that all, or even a majority of these, will use exactly the same HL7 message structures in terms of versions, optional/mandatory segments, extension Z segments, and so on. A sensible approach to dealing with these kinds of issues, and a key component of the HL7 Enterprise Architecture, is the so called Canonical (or Common) Message Model (CMM). The CMM works hand-in-glove with the enterprise architecture in which transformation to/from the CMM is performed at the edges of the integration domain. This article discusses major considerations and works through the mechanics of deriving a Canonical Message Model for a fictitious Healthcare Enterprise and implementing it using the Oracle SOA Suite 11g HL7 tooling as an example. The article will also discuss and illustrate a mechanism for injecting arbitrary metadata into the canonical message, generated by the B2B Document Editor, in such a way that it is ignored by the Edge-dwelling B2B infrastructure but is significant to the SOA infrastructure.

The original article is available at: http://blogs.czapski.id.au/2010/10/healthcare-enterprise-%e2%80%93-it-architecture-building-blocks-canonical-message-model-for-a-hl7-enterprise

Wednesday Oct 06, 2010

Migrating Java CAPS 5/6 Assets to Oracle SOA Suite 11g - HL7 JCD to Spring Component Migration

This article is of potential interest to these Sun/SeeBeyond customers who have an investment in moderate and large Java Collaboration Definition-based transformation and mapping rules, and who are looking for ways to reuse as much as possible of the Java code involved, when migrating to the Oracle SOA Suite. The example developed in this article comes from the healthcare domain and uses the HL7 OTDs (Object Type Definitions). This is a deliberate choice because all but the most trivial HL7 transformations will involve hundreds of lines of Java code, therefore are a good candidates for migrating to the SOA Suite Spring Component as means of preserving the code and the effort invested in developing it. This does not make the method domain-specific. On the contrary, the method is applicable to all other domains where JCDs with significant transformation and mapping rules content are used.

Discussion in this article addresses a subset of technologies available in the Java CAPS and in the SOA Suite. Specifically, the Java Collaboration Definitions supported in Java CAPS 5.x and in Java CAPS 6/Repository, and the Spring Component supported in the SOA Suite 11g R1 PS2. Both use the Java programming language and related runtime environment to implement processing logic.  There is no discussion pertaining to JBI-based technologies or Java CAPS BPEL-based technologies. There is no discussion about other ways in which Java logic can be deployed as part of a Oracle SOA Suite solution.

The HL7 eWay and JCD based Java CAPS solution will be ported to the Oracle SOA Suite 11g B2B and Mediator-based environment. HL7 Adapters will be replaced with the Oracle “Healthcare Adapters”, provided by the SOA Suite B2B HL7 support infrastructure. Routing will be provided by the Mediator component and transformation logic will be ported to the Spring Component.

This article walks through the process of “extracting” JCD source and related archives from Java CAPS, developing a stand-alone Java application which uses the JCD source, encapsulating JCD source in a Spring component and finally reproducing Java CAPS HL7 solution functionality in an equivalent SOA Suite solution.

The complete article is available through the original blog at http://blogs.czapski.id.au/2010/10/migrating-java-caps-56-assets-to-oracle-soa-suite-11g-hl7-jcd-to-spring-component-migration

Monday Aug 30, 2010

Oracle SOA Suite 11g R2 B2B Quick HL7 v2 Delimited to HL7 v2 XML Conversion

In this article I discuss and illustrate a “SOA-less” solution which uses the Oracle SOA Suite 11g R2 B2B functionality to convert HL7 v2 delimited messages into their equivalent HL7 v2 XML messages. I say “SOA-less” because all the work is done entirely within the B2B part of the SOA Suite – no OSB or SOA Composites are involved.

The article text is available at http://blogs.czapski.id.au/wp-content/uploads/2010/08/06_Oracle_SOA_Suite_B2B_Quick_HL7v2_Delimited_to_HL7v2_XML_Conversion_v1.0.0.pdf

Sunday Jun 27, 2010

Oracle SOA Suite 11g HL7 Inbound Example - Back End-constructed Functional ACK Addendum

This article is a follow on to the “Oracle SOA Suite 11g HL7 Inbound Example – Functional ACK Addendum” article and the “Oracle SOA Suite 11g HL7 Inbound – Customized HL7 Message Structure and Data Validation” article. In these articles the B2B infrastructure was configured to return the “Functional ACK” when it validated each message. The ACK was a positive or a negative ACK depending on whether the message passed validation. The ACK was generated by the B2B Layer before the message was passed on to the SOA Layer.

In this article I expand on the previous posts by configuring the B2B Layer to pass the message to the SOA Layer and pass the Functional ACK, generated by the SOA Layer on to the requester. To process a message and produce the ACK we will build and deploy a new SOA Composite.

The original article, Oracle SOA Suite 11g HL7 Inbound Example – Back End-constructed Functional ACK Addendum, is to be found at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-inbound-example-back-end-constructed-functional-ack-addendum

Saturday Jun 26, 2010

Oracle SOA Suite 11g HL7 Inbound - Customized HL7 Message Structure and Data Validation

Messages we used in previous articles dealing with HL7 Inbound (Oracle SOA Suite 11g HL7 Inbound Example – Functional ACK Addendum, Oracle SOA Suite 11g HL7 Inbound Example) were not strictly speaking valid according to the default HL7 V2 ADT A01 message specification produced by the Oracle B2b Document Editor. Both the message structure was not quite right and the data was not quite right. To allow such messages in, we disabled Validation property in the B2B Trading Partnership Agreement.

In this article we will alalyze the data and  create a customized HL7 v2 ADT A01 structure which will allow us to successfully validate incoming messages. We will then modify the document definition and Partnership Agreements to use this custom structure and validate messages as they come in.

The customization discussed in this article only scratches the surface of what is possible with the Oracle B2B Document Editor.

The original article is available at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-inbound-customized-hl7-message-structure-and-data-validation

Friday Jun 25, 2010

Oracle SOA Suite 11g HL7 Outbound Example

In this article I develop and exercise a simple Oracle SOA Suite 11g B2B infrastructure-based HL7 v2 Sender (outbound) project for an ADT A01 message and use Message tracker to view messages.

This article complements previous articles in the series, Oracle SOA Suite 11g HL7 Inbound Example and Oracle SOA Suite 11g HL7 Inbound Example – Functional ACK Addendum.

The original article is available at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-outbound-example

Wednesday Jun 23, 2010

Oracle SOA Suite 11g HL7 Inbound Example - Functional ACK Addendum

This article is a follow on to the “Oracle SOA Suite 11g HL7 Inbound Example”, at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-inbound-example. In that article the B2B infrastructure was configured to return the “immediate ack” as soon as it received each message. The ACK was always a positive ACK, regardless of whether the message was valid or not and whether it was successfully processed.

In this article I expand on the previous post by adding the Functional ACK, an explicit ACK message, which is returned after a message is parsed and validated, if validation is required. This means that rather than always returning an ACK the receiver will return a NAK if the message is invalid.

The original article is available at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-inbound-example-functional-ack-addendum

Saturday Jun 19, 2010

Oracle SOA Suite 11g HL7 Inbound Example

As Sun Microsystems, and SeeBeyond before it, Oracle provides support for integration of systems which use HL7 v2.x messaging. Unlike Sun, and SeeBeyond before it, Oracle treats HL7 messaging as Business to Business exchanges (B2B) and uses the B2B part of the Oracle SOA Suite to accomplish the task [1].

In this article I develop and exercise a simple Oracle SOA Suite 11g B2B infrastructure-based HL7 v2 Receiver project for an ADT A01 message and use Message tracker to view messages, message states and messaging performance.

The original article can be found at http://blogs.czapski.id.au/2010/06/oracle-soa-suite-11g-hl7-inbound-example

About

In this Blog I post abstracts of articles / writeups / notes on various aspects of Java CAPS and SOA Suite including solutions, discussions and screencasts. The links to the referenced material are included in the bodies of the abstracts.

Search

Categories
Archives
« April 2014
SunMonTueWedThuFriSat
  
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
   
       
Today