By Hinkmond-Oracle on Nov 01, 2012
Next, we need some low-level peripherals to connect to the Raspberry Pi GPIO header. So, we'll do what's called a "Fry's Run" in Silicon Valley, which means we go shop at the local Fry's Electronics store for parts.
In this case, we'll need some breadboard jumper wires (blue wires in photo), some LEDs, and some resistors (for the RPi GPIO, 150 ohms - 300 ohms would work for the 3.3V output of the GPIO ports). And, if you want to do other projects, you might as well buy a breadboard, which is a development board with lots of holes in it to stick wires and electronic components into. Ask a Fry's clerk for help. Or, better yet, ask the customer standing next to you in the electronics components aisle for help. (Might be easier)
So, go to your local hobby electronics store, or go to Fry's if you have one close by, and come back here to the next blog post to see how to hook these parts up.