By joesciallo on May 03, 2007
Before You Begin
At a minimum, you need to enable logging for the channels that you want to troubleshoot. The amount of logging that you set (log level) depends on your situation. To enable logging on a channel and learn about other options, see Managing MTA Message and Connection Logs in Sun Java System Messaging Server 6.3 Administration Guide for more information.
Troubleshooting TCP Channels
This section describes a general approach to troubleshoot build up of messages in TCP message queues to determine if there is an actual problem.
When you suspect that there is something happening that is more than the store-and-forward aspect of messages building up in a message queue, begin by using the
imsimta qm summarizecommand.
For more information, see imsimta qm in Sun Java System Messaging Server 6.3 Administration Reference.
imsimta qm summarizecommand can greatly impact your system if you have a large backlog of messages. Instead of running this command frequently, consider using the
imsimta qm messageschannel command instead.
This command lists the destination hosts for which messages are queued in the specified channel. This command also lists how many messages are waiting for their next schedule retry (the delayed messages column) versus how many are ready to be retried now (active now). When you use the
imsimta qm messagescommand, you must specify a channel name; a wildcard is not valid input. For example:
messsages tcp_localhost active messages delayed messages example.com 0 2000 sesta.com 0 3000
In this example, 2,000 messages are waiting for their next scheduled retry to be delivered to
example.com, and 3,000 are waiting for their next scheduled retry for delivery to
Note - The Messaging Server 6.3 release removed the
imsimta qm messagescommand. However, Messaging Server 6.3 does contain a new, useful command—
imsimta qm jobs—to help understand why messages are not being delivered.
This information is also useful for the situation where messages have failed and are waiting to be retried. If you see there are many messages in a channel queue, but most of them are delayed, this probably indicates the problem is with the remote domain. See Destination Host Problems for information on how to workaround this problem.
Note - A message can be in process of being tried by a job, or on a channel waiting to be tried, or on a channel waiting to be retried. The
active messagescolumn includes messages which have not been tried yet and those which were previously delayed and are now ready to be tried again. That is why you might see a zero (0) in this column. In Messaging Server 6.3, you can see the messages being retried with the new
iPlanet Messaging Server 5. Use
top -to channelor
top -domain_to channelto analyze what is going on in that channel.
Look for trends on your system. For example, when most of the mail is all destined for one remote domain, check the status of that remote domain.
Additionally, look in the
mail.log_currentfile to determine what has happened in recent history when you tried to send mail to that remote domain.
imsimta qm dir -toaddress command to select a group of messages. Then use this information to look at the delivery attempt history of some of the messages. (You use the sequence numbers from the
dirlisting). Often, you will find that these messages are all non-delivery notifications for spam, which was not deliverable. If this is the case, determine how those original spam messages got into the system in the first place. Verify that the messages are spam by using the
history. If this is indeed the case, think about routing the non-delivery notifications through a different outbound channel, thereby preventing them from choking the normal
For example, use the
dispositionchannelkeywords to specify an alternate process channel to queue delivery status notifications and modify status notifications, respectively. Then you use source-specific rewrite rules to direct messages from these process channels to a particular
tcp_\*channel set to only use a few processes/threads. For more information, see Source-Channel-Specific Rewrite Rules ($M, $N) in Sun Java System Messaging Server 6.3 Administration Guide.
Verify that the master process for the channel is started. The
tcp_\*channels all use the
smtp_clientprocess. To find out which process is associated with which channel, in respect to dequeuing, see the
master_commandparameter in the associated channel block in the
Destination Host Problems
When you have determined that messages are queued to an unavailable remote host, you have two options:
Create a new channel for the host. If this host is consistently a problem, all future email will go to this new channel. For existing messages that are enqueued, you can either wait for the problem with the destination host to be resolved or delete the messages from the queue.
Increase the number of delivery threads for the channel, or set a ceiling on the number of queued messages that will trigger a new thread or process to start. See the
max_client_threadsparameter in the channel option file and the
threaddepthchannel keyword, respectively.
Troubleshooting the ims-ms Channel
This section describes a general approach to troubleshoot build up of
messages in the
ims-ms channel. The four general cases
ims-ms channel shows a build-up of messages in
the queue are:
IMAP_MAILBOX_LOCKED. While you might see this error in a message file that is briefly in the queue area, typically such a message file doesn't remain for long. The error only repeats in a message file in the queue area if the mailbox is remaining locked for an extended period. The job controller retries delivery of these messages after short delays until either the message gets delivered or a different error is encountered.
IMAP_MAILBOX_BADFORMAT, IMAP_MAILBOX_NOTSUPPORTED. The mailbox is most likely corrupted. This case rarely occurs. You might want to use the
reconstructcommand for these cases.
IMAP_IOERROR. The message store is most likely corrupted or otherwise inaccessible. This case occurs even more rarely.
IMAP_QUOTA_EXCEEDED. The user or users are over quota. This is the most common case, which this technical note discusses below.
Note - If the channel gets a permanent delivery failure error, then the
message is immediately bounced and does not remain in the
To troubleshoot the
ims-ms channel, use the following
Perform a similar investigation as you would for
tcp_\*channels by using the
imsimta qm summarizecommand to view what is happening on the system.
imsimta qm historycommand to examine the message IDs to detect if there are different sorts of messages. For example, you might see:
Message id: 800 Filename: /opt/SUNWmsgsr/data/queue/tcp_local/001/ZZf0b0KaNZykG.00
A message's file name starting with
ZZindicates that it has not been tried yet. The message file name is a counter starting at
ZZand decremented (
ZX, and so on) each time the message is tried, fails, and is reenqueued for later retry. Thus, a
ZZ\*file name has not been tried yet, and there is no history.
In general, but not always, when you have non-
.HELDfiles in the queue area, you have the IMAP_QUOTA_EXCEEDED case. (The frequency with which you see IMAP_MAILBOX_LOCKED conditions probably depends upon user and email client characteristics. This condition is more common with users who like to receive and move around lots of large attachments but it should typically occur rarely.)
For a site that enforces quota, probably most of the non-
.HELDmessages in the
ims-msqueue area are there because of the recipient user being over quota. Verify this is the case by running the
imsimta qmcommand with the
historysubcommand. You should see “over quota" in the history of the over-quota messages.
Note - In iPlanet Messaging Server 5.2, the
imsimta qm topcommand was enhanced to have more sorting options.
Are there any Q status messages in the
mail.log_currentfile pertaining to the
ims-mschannel? When you see “mailbox is busy” and Q status in the
mail.log_currentfile, then the message is put back on the queue to be retried later as per the job controller's scheduling and the
backoffkeyword on the channel.
If not, check that the
ims_masterprocess is running. Are there any errors in its log file (the
ims_masterprocess could be hung. Use the
imsimta processcommand to verify running processes.
Use the following strategies for users who become over quota:
Inform users of the need to perform mailbox maintenance to return to under quota status, or increase their quota.
Reduce the time that mail is queued for over quota accounts before being bounced back as over quota. See the
configutilparameter. If you don't want to queue email for over quota accounts (and bounce the message straight back), set this parameter to 0 (that is, no grace period). This parameter is available in iPlanet Messaging Server 5 as well.
For Messaging Server 6, you can enable the
configutilparameter. This enables quota enforcement before messages are enqueued in the MTA and prevents the MTA from filling up.
More About the ims-master Process
At times you might see the
ims-master process shutting
down and starting up in the log file:
grep "Sun Java" imta[30/Aug/2006:17:05:05 -0400] learn ims_master: General Notice: Sun Java(t m) System Messaging Server ims_master 6.2-7.02 (built Jun 13 2006) shutting down [30/Aug/2006:17:05:20 -0400] learn ims_master: General Notice: Sun Java(t m) System Messaging Server ims_master 6.2-7.02 (built Jun 13 2006) starting up [30/Aug/2006:17:07:24 -0400] learn ims_master: General Notice: Sun Java(t m) System Messaging Server ims_master 6.2-7.02 (built Jun 13 2006) shutting down [30/Aug/2006:17:07:32 -0400] learn ims_master: General Notice: Sun Java(t m) System Messaging Server ims_master 6.2-7.02 (built Jun 13 2006) starting up [30/Aug/2006:17:19:31 -0400] learn ims_master: General Notice: Sun Java(t m) System Messaging Server ims_master 6.2-7.02 (built Jun 13 2006) shutting down
This is normal operation and does note indicate a problem. This is a “notice”
message (not an “error” or “critical” level message).
As with all channel jobs,
ims-ms channel jobs shut down
from time to time based on either having nothing to do, or based on “timing
out” (getting old). Then the job controller restarts new jobs as needed.
You might want to increase the number of processes the job controller
can start for the
tcp_\* channels, or increase the number of threads
each of those processes will start. You might also want to give the
tcp_local channel its own pool. If you observe queued messages (total across
all queues) to be greater than 100,000, increase the value of
MAX_MESSAGES for the
job_controller.cnf setting. See Job Controller
Configuration File in Sun Java System
Messaging Server 6.3 Administration Reference for more
This section contains additional information to help you understand MTA operations.
What Are .HELD Messages?
If the MTA detects that messages are bouncing between servers or channels,
delivery is halted and the messages are stored in a file with the suffix
.HELD in the msg-srv-base
/data/queue/channel directory. Typically, a message loop occurs because each server
or channel thinks the other is responsible for delivery of the message. You
need to manually fix these .HELD messages with the
There is an unfortunate collision of terminology and concepts between
.held messages and the
hold channel. And worse
still, the command to process
.held messages is called
release, whereas the command to process messages on the
You use the
hold channel to hold messages of a recipient
temporarily prevented from receiving new messages. For example, you might
be moving a user's mailbox and want to hold new incoming messages. The
hold channel is located in the msg-svr-base
/queue/hold directory. Messages are written to this queue as
.held files. Because
the job controller doesn't “see” these
they are not dequeued for delivery. You release these files with the
qm release command, and the reprocess daemon reprocesses them.
How Does a Message Become a .HELD Message?
Messaging Server makes use of
that you set in the
option.dat file to determine when
a message is put into the
.HELD state. The most relevant
options and their default values are:
Once a message has looped through the MTA enough to accumulate
MAX_RECEIVED_LINES header lines indicating the local MTA, then the message becomes
.HELD. You can cause the MTA to immediately recognize that it has
connected to itself, rather than waiting to accumulate
MAX_LOCAL_RECEIVED_LINES local Received: headers, by specifying the
on the appropriate channel(s) in the
For More Information on Troubleshooting the MTA
Use the following to aid in troubleshooting the MTA: