Monday Jan 04, 2010

OpenSolaris, ZFS, USB 2.0 + 30 Watts = Home Fileserver

Background

A little project I'd had in the back of my mind for some time was to replace the family fileserver over the Holidays. I'd been using a Linksys NSLU2 for several years, but we were about to outgrow our 500GB capacity, and response time was never all that great. I'd installed Unslung early on, which gave me SMB, NFS, FTP, etc., but the poor little Intel XScale chip inside struggled just to drive one server, let alone several simultaneous access methods.

The NSLU2 was most recently running with two 500GB USB 2.0 drives attached. The only redundancy provided is the ability to backup from the disk to an identical disk once a day - not very robust. I'd been thinking about it ever since I saw Zhong's really good writeup of creating an OpenSolaris fileserver about a year ago. The factors driving my decision were as follows:

  1. Green: be as energy-efficient as possible; reuse existing pieces if possible
  2. Robust and Redundant: Provide more storage and more robust storage (RAID Z or better)
  3. Compatible: Provide the SMB/CIFS (for family) and NFS (for me) access we were accustomed to at home
  4. Familiar: Leverage technologies I know:

Well, when I saw the rollout for Shuttle's X27D dual-core Atom-based SFF, I knew that was what I wanted. I waited, I planned. Last month the stars aligned, the prices came down, and I acted.

Old Setup 


Make/Model
Best Current Price
Specs
Server
Linksys NSLU2
US$43 refurbished; US$86 new
USB2 disk I/F; 100Mbps net I/F; running Unslung 6.8
Storage
2 x Simpletech SimpleDrive External Disk drives
US$88 refurbished; US$51 used (EBay)

3.5" form; USB2 disk I/F; 524GB raw storage each

This setup provides:

  • 490GB formatted storage
  • Nightly automatic backup onto clone disk
  • SMB/CIFS access via LAN
  • Boots in around 15 minutes
  • NFS access via LAN (only via reflashing with Unslung)
  • ~4.5MB/s write (NFS), ~3MB/s write (SMB)
  • ~5MB/s read (NFS), ~4MB/s read (SMB), ~150KB/s (scp, sftp or rsync) - note: any encrypted transfers will be CPU-limited by that poor XScale processor)

New Setup

I decided to reuse my existing external disk drives, as well as an existing laptop drive. This meant I only needed to purchase the X27D itself, plus memory. No DVD/CD - I use the network and bootable USB devices instead. To allow for larger, more robust, and more robust storage, I was able to find a used Simpletech drive (same access times, same total raw storage capacity) on EBay.


Make/Model
Price Paid
Specs
Server
Shuttle X27D SFF
US$139 refurbished
Builtin dual-core Atom 330 CPU @ 1.6GHz; GigE networking


US$33 new
2GB DDR2 memory


Existing disk
2.5" 120GB SATA disk
Storage
3 x Simpletech SimpleDrive External Disk drives
Two existing USB disks plus a third from EBay - US$51

3.5" form; USB2 disk I/F; 524GB raw storage each

This setup provides:

  • 957GB formatted storage via 3-disk RAID-Z pool
  • SMB/CIFS, SSH, NFS protocols supported
  • Boots in around 75 seconds
  • Server consumes 26W idle, 32W under load; disks consume power only when accessed, and spin down after 20 minutes
  • ~14MB/s write (NFS)
  • ~18MB/s read (NFS)
  • Same disk latency (due to disk spin-up) as original solution
  • More onboard processing 'headroom' for future services

Configuring OpenSolaris and ZFS

I downloaded the USB Boot Image of Build 129 of OpenSolaris from here, placing the image on a 1GB USB Flash drive using the usbcopy command. After assembling the server, I set the BIOS to boot from USB first, then booted from the 'Live USB'. Installation just worked, and everything seems to be properly supported (haven't tried audio, as this is a headless system).

I'd rsync'ed the contents of the old fileserver to another server the day before (slooowwwww from an NSLU2 - when one of your systems is CPU-limited, make sure you rsync with the lightest-weight encryption possible [I used arcfour]). Setting up the powerful, performant, redundant ZFS filesystem required only a few steps:

# zpool create fs raidz c4t0d0 c6t0d0 c7t0d0   # RAIDZ pool (2+1)
# zfs set sharenfs=on fs # NFS share
# zfs set sharesmb=on fs # Samba share

Still to do:

  • Investigate adding cache to the zpool via part of the internal SATA disk (or possibly eventually an SSD, when prices come down)
  • More rigorous and apples-to-apples performance comparisions
  • Optimizing the OpenSolaris settings and services


Wednesday Dec 05, 2007

OpenSolaris on a new Shuttle SFF

A new week, a new OpenSolaris install experience...

Picked up a new replacement 'everything' server last week, a Shuttle SN68SG2. The intent is to upgrade my main work server, and take advantage of some latest technologies:

  • Multi-core lower-power AMD CPU
  • OpenSolaris xVM technology for virtualization right on top of hardware hypervisor
  • Gigabit Ethernet (I tend to schlep a lot of big .iso images from box to box here)

So I tricked this box out (under $500!) as follows:

  • AMD Athlon 64 X2 4800+ (2.5GHz, dual-core, 65W) CPU
  • 2 x 2GB DDR2 400 memory
  • 250GB SATA disk

Installing the latest Nevada (nv78), went fairly well, except for the NIC. The rundown:

  • CPU/memory: works (frkit isn't happy with dual-core, but that's a known issue)
  • SATA: works!
  • Audio: not yet tested [update: it works]
  • USB 2.0: works
  • Firewire: not yet tested
  • Onboard graphics: works great with bundled nVidia driver, driving 1680x1050 Benq monitor
  • Onboard NIC (nVidia 630a chipset): 'nge' driver did not recognize this chipset, but Murayama-san's 'nfo' 2.X driver does (once again, Arigato Gozaimashita, Murayama-san!)
Next step: playing with xVM (which this CPU allows via AMD-V). Stay tuned.


About

Main Sequence: 1) an astronomy term denoting the lifecycle of a majority of known stars. 2) err @ Sun/Oracle: long-time (since 1988) Sun/Oracle veteran, still shining in an ever-changing high-tech universe

Search

Archives
« April 2014
SunMonTueWedThuFriSat
  
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
   
       
Today