ODA: How to configure ILOM after first deployment through Appliance Manager?
By uwes on Dec 28, 2011
There are two ways to configure ILOM after the deployment through Appliance manager has taken place.
Option 1: use ipmitool
ipmitool -I open sunoem cli "set /SP/network pendingipdiscovery=static pendingipaddress=<ip address> pendingipgateway=<gateway> pendingipnetmask=<netmask> commitpending=true" ipmitool -I open sunoem cli "set /SP hostname=<hostname>”
Option 2: use ILOM based web-browser interface
description of using the interface is in the ILOM documetation.