By Christophe Dupupet on Sep 03, 2009
The posts in this series assume that you have some level of familiarity with ODI. The concepts of Interface, Model and Knowledge Module are used here assuming that you understand them in the context of ODI. If you need more details on these elements, please refer to the ODI Tutorial for a quick introduction, or to the complete ODI documentation for detailed information.
When ODI moves data from your source systems to your target system, it automates the management (creation, loading, deletion) of all the necessary staging tables. The Knowledge Modules control which tables are created when and where, so that the developers do not have to worry about these mechanics.
There are cases though where the logic of your integration processes calls for the creation of your own staging tables, independently of what ODI will create. You may want to pre-aggregate some data before applying further logic. You may want to break a very complex interface into a set on interfaces that will be easier to develop and maintain. Over time, I have found that creating these intermediate tables very valuable.
The problem is: they are not part of the data model.
One of the ODI features that is often overlooked is the ability to create tables directly from the designer tool.
We will look into the creation of the table from 2 different angles: using ODI Diagrams or using temporary interfaces. We will look into the pros and cons of each approach.Note that these techniques can be used beyond staging tables and leveraged in the design of your overall solutions.
1. ODI Diagrams
ODI Diagrams can be found under the Models section in the Designer interface.
Creating Diagrams will have many benefits from a design perspective:
- You will be able to retrieve and convert table structures from other technologies, ODI will automatically convert the data types as required;
- Once you have designed your new tables, ODI can generate a DDL that is context independent (See this previous post for more details on contexts);
- If you derive the structure of the new tables from existing models, ODI will offer the automatic creation of interfaces for you - using the base tables as sources and the new tables as targets.
Let's now see how to create a diagram and get started.
1.1 Creation of an ODI Diagram
In your models, you will find the entry point for Diagrams directly under the Model name itself. Simply right-click on the Diagrams entry and select Insert Diagram to create your first Diagram.
When you create a diagram, you can either model all your tables one column at a time, or start from existing structures. This is the feature that I like best, as it will save me a lot of time in all subsequent operations. To try this out, simply drag and drop a table from another model (if possible even from a different technology) directly in the model. ODI will first ask you if you really want to create this table in the new model. Then it will immediately match the data types with the new technology, and display the resulting table so that you can make any modification as required: you may want different datatypes, different column names, you may want to add and remove columns, or even rename the table itself. You can either perform these operations as you are copying the structure, or later on when you will edit your diagram.
Once you validate the definition of the table, ODI will display the table in the diagram and add it to your model tree. Note that at this point in time, the table is not created in the database.
Not all tables will necessarily have a matching structure in other systems. You may have to create them directly from the diagram. You can then take advantage of the toolbar to create not only the table and its columns, but also to define the relationship between the different tables.
1.2 Leveraging the ODI Diagram
Once the Diagram has been created, several options become available:
- Generation of the DDLs to create the tables in the actual databases
- Generation of Interfaces using the initial tables as sources and the new tables as target (and vice-versa).
All these operations are possible from the Models menu (right-click on the model to see these operations).
The Generate DDL menu will allow you to create the tables you have designed along with all the necessary constraints. Furthermore, you will be able to run the DDL in all contexts with absolutely no code modification - hence guarantying consistency across environments .
The creation of interfaces will be as easy. But interfaces will require knowledge modules, and to truly take advantage of this feature, you want to make sure that the knowledge modules of your choice (and only these!) are imported in a project. The trick with "only these" is that you want the knowledge modules to be selected for you automatically. When ODI will generate the interfaces, if there is only one choice for the LKM, and only one choice for the IKM, maybe a CKM if needed - then you will not even have to open the interfaces before you run them (except for a sanity check maybe!). Do not hesitate and modify the default values for the KMs you have selected as, again, that will save you a tremendous amount of time in terms of reviews.
Once the KMs are set, go back to your model, and select the menu entry Generate Interfaces IN to generate the interfaces that will load your new tables (or Generate Interfaces OUT to generate interfaces that will extract data from your new tables). Select the project where you have imported the appropriate KMs as the destination for the interfaces, and wait for the automatic generation to happen. If you have renamed columns, they are properly mapped to the original column. If a table was created from several source tables, all sources are part of the interfaces. You only have to worry about new columns, relationships between source tables that ODI would not know of, and transformations if you need any.
Over time, I've used this feature a lot when I am given a set of files that are supposed to represent tables in a real case. I reverse engineer the files - then use the files definitions to quickly design the equivalent structures in the database that I need to load... and run the DDLs and interfaces all in one shot. A very nice way to save hours of development time!
1.3 When to use this approach
The real benefit of this approach is in the massive generation of DDLs and interfaces. If you only need to load a couple of tables, the benefit is not as obvious. But as the number of tables to create and interfaces to generate grows, so does the value of Diagrams. I have recently worked on a case where in less than an hour, I had two dozen tables designed, created, and loaded with data when initially all I had was a series of flat files...
2. TEMPORARY INTERFACES
There will be cases where you need to create just a few set of staging tables and you do not necessarily want to go through the creation of models and DDLs. For these cases, ODI will let you create your table directly from with your interfaces.
2.1 Creating the Interface
When you create a new table in an interface, you will first have to indicate where the table will be created. To do so, select "staging area different from target" in the definition tab of your interface, and select the schema where the table will be created.
2.2 Designing the table
The first step will be to name the table, and define where it will be created (in the data schema or in the work schema. These schemas are defined in the Topology interface. The work schema is typically your staging area). To name the table, click on the "Untitled" caption in the target side of you interface, and enter a table name in the properties window. It is in that same properties window that you will select the data or work schema.
You can then add columns to this table. If you add a datastore on the source side of your interface, you can add the columns one by one (simply drag and drop the columns from the source datastore to the target datastore. Or you can right-click on any source column to add it to the target table. Or you can right-click on the table name and add all columns at once by selecting the menu "add to target". When the columns are added, ODI converts the data types to match those of the target technology, and pre-maps the target columns to the source columns.
Of course, you can always edit the column information later on in the Properties window.
You can also right-click under the existing columns on the target side to manually add new columns. In this case, you will have to specify the column name, data type and size.
2.3 Creating and loading the table
Once you have created the table as needed, you can use it as any other target table in your interface and design your transformations as usual. The one thing to remember will be to set the "CREATE_TARGET_TABLE" option to "YES" in the IKM of this interface to make sure that the table is created at execution time.
2.4 Using the staging table as a source
Once this table has been created and loaded, all you have to do to use it as a source is to drag and drop the Interface as a source in the next interface (you read that right: drag and drop the interface directly from the project tree, as if it were a table!). No need to actually reverse engineer the table and add it to your model.
This does not mean that you cannot reverse engineer the table and add it to your model. In many cases, the table will actually belong to the model in the end and definitely belongs with your metadata.
2.5 When to use this approach
This second approach is more attractive for "one-off" creation of staging tables. It is a very quick and easy way to integrate intermediary steps in your data integration logic, but does not have the scale effect of the diagram approach.
As we have seen here, ODI offer multiple techniques to create new tables very easily directly from the Graphical Interface. Depending on the techniques used to create the tables, ODI will offer many shortcuts to make your development initiatives even faster: either the generation of DDL and interfaces based on the old and new structures, or the ability to create a table and use it immediately without ever having to deal with the metadata...
All Screenshots were taken using version 10.1.3.5 of ODI. Actual icons and graphical representations may vary with other versions of ODI.
For more information about ODI, click here.