By DarrenMoffat on Sep 12, 2013
1. Consumer InterfacesThe Solaris random number generation (RNG) system is used to generate random numbers, which utilizes both hardware and software mechanisms for entropy collection. It has consumer interfaces for applications; it can generate high-quality random numbers suitable for long term
asymmetric keys and pseudo-random numbers for session keys or other cryptographic uses, such as a nonce.
1.1 Interface to user space
The random(7D) device driver provides the /dev/random and /dev/urandom devices to user space, but it doesn't implement any of the random number generation or extraction itself.
There is a single kernel module (random) for implementing both the /dev/random and /dev/urandom devices the two primary entry points are rnd_read() and rnd_write() for servicing read(2) and write(2) system calls respectively.
rnd_read() calls either kcf_rnd_get_bytes() or kcf_rnd_get_pseudo_bytes() depending on wither the device node is an instance of /dev/random or /dev/urandom respectively. There is a cap on the maximum number of bytes that can be transfered in a single read, MAXRETBYTES_RANDOM (1040) and MAXRETBYTES_URANDOM(128 * 1040) respectively.
rnd_write() uses random_add_entropy() and random_add_pseduo_entropy() they both pass 0 as the estimate of the amount of entropy that came from userspace, so we don't trust userspace to estimate the value of the entropy being provided. Also only a user with uid root or all privilege can open /dev/random or /dev/urandom for write and thus call rnd_write().
1.2 Interface in kernel spaceThe kcf module provides an API for randomnes for in kernel KCF consumers. It implements the functions mentioned above that are called to service the read(2)/write(2) calls and also provides the interfaces for kernel consumers to access the random and urandom pools.
If no providers are configured no randomness can be returned and a message logged informing the administrator of the mis-configuration.
2. /dev/randomWe periodically collect random bits from providers which are registered with the Kernel Cryptographic Framework (kCF) as capable of random number generation. The random bits are maintained in a cache and it is used for high quality random numbers (/dev/random) requests. If the cache has sufficient random bytes available the request is serviced from the cache. Otherwise we pick a provider and call its SPI routine. If we do not get enough random bytes from the provider call we fill in the remainder of the request by continously replenishing the cache and using that until the full requested size is met.
The maximum request size that will be services for a single read(2) system call on /dev/random is 1040 bytes.
kcf_rnd_init() is where we setup the locks and get everything started, it is called by the _init() routine in the kcf module, which itself is called on very early in system boot - before the root filesystem is mounted and most modules are loaded.
For /dev/random and random_get_bytes() a static array of 1024 bytes is setup by kcf_rnd_init().
We start by placing the value of gethrtime(), high resolution time since the boot time, and drv_getparam(), the current time of day as the initial seed values into the pool (both of these are 64 bit integers). We set the number of random bytes available in the pool to 0.
2.2 Adding randomness to the rndpoolThe rndc_addbytes() function adds new random bytes to the pool (aka cache). It holds the rndpool_lock mutex while it xor in the bytes to the rndpool. The starting point is the global rindex variable which is updated as each byte is added. It also increases the rnbyte_cnt.
If the rndpool becomes full before the passed in number of bytes is all used we continue to add the bytes to the pool/cache but do not increase rndbyte_cnt, it also moves on the global findex to match rindex as it does so.
2.3 Scheduled mixingThe kcf_rnd_schedule_timeout() ensures that we perform mixing of the rndpool. The timeout is itself randomly generated by reading (but not consuming) the first 32 bits of rndpool to derive a new time out of of between 2 and 5.544480 seconds. When the timeout expires the KCF rnd_handler() function [ from kcf_random.c ] is called.
If we have readers blocked for entropy or the count of available bytes is less than the pool size we start an asynchronous task to call rngprov_getbyte() gather more entropy from the available providers.
If there is at least the minimum (20 bytes) of entropy available we wake up the threads stopped in a poll(2)/select(2) of /dev/random. If there are any threads waiting on entropy we wake those up too. The waiting and wake up is performed by cv_wait_sig() and cv_broadcast(), this means that the pool lock will be held when cv_broadcast wakes up a thread it will have the random pool lock held.
Finally it schedules the next time out.
2.4 External caller SeedingThe random_add_entropy() call is able able to provide entropy from an external (to KCF or its providers) source of randomness. It takes a buffer and a size as well as an estimated amount of entropy in the buffer. There are no callers in Solaris that provide a non 0 value for the estimate
of entropy to random_add_entropy(). The only caller of random_add_entropy() is actually the write(2) entry point for /dev/random.
Seeding is performed by calling the first available software entropy provider plugged into KCF and calling its KCF_SEED_RANDOM entropy function. The term "software" here really means "device driver driven" rather than CPU instruction set driven. For example the n2rng provider
is device driver driven but the architecture based Intel RDRAND is regardedas "software". The terminology is for legacy reasons in the early years of the Solaris cryptographic framework. This does however mean we never attempt to seed the hardware RNG on SPARC S2 or S3 core based systems (T2 through M6 inclusive) but we will attempt to do so on Intel CPUs with RDRAND.
2.5 Extraction for /dev/randomWe treat rndpool as a circular buffer with findex and rindex tracking the front and back respectively, both start at position 0 during initial initalisation.
To extract randomness from the pool we use kcf_rnd_get_bytes(); this is a non blocking call and it will return EAGAIN if there is insufficient randomness available (ie rndbyte_cnt is less than the request size) and 0 on success.
It calls rnd_get_bytes() with the rndpool_lock held, the lock will be released by rnd_get_bytes() on both sucess and failure cases. If the number of bytes requested of rnd_get_bytes() is less than or
equal to the number of available bytes (rnbyte_cnt) then we call rndc_getbytes() immediately, ie we use the randomness from the pool. Otherwise we release the rndpool_lock and call rngprov_getbytes() with the number of bytes we want, if that still wasn't enough we loop picking up as many bytes as we can by successive calls, if at any time the rnbyte_cnt in the pool is less than 20 bytes we wait on the read condition variable (rndpool_read_cv) and try again when we are woken up.
rngprov_getbytes() finds the first available provider that is plugged into KCF and calls its KCF_OP_RANDOM_GENERATE function. This function is also used by the KCF timer for scheduled mixing (see later discussion). It cycles through each available provider until either there are no more available or the requested number of bytes is available. It returns to the caller the number of bytes it retreived from all of the providers combined.
If no providers were available then rngprov_getbytes() returns an error and logs and error to the system log for the administrator. A default configuration of Solaris (and the one required by FIPS 140-2 security target) has at least the 'swrand' provider. A Solaris instance running on SPARC S3 cores (T2 through M6 inclusive) will also have the n2rng provider configured and available, this is true even for Solaris instances in an LDOM.
2.6 KCF Random ProvidersKCF has the concept of "hardware" and "software" providers. The terminology is a legacy one from before hardware support for cryptographic algorithms and random number generation was available as unprivileged CPU instructions.
It really now maps to "hardware" being a provider that as a specific device driver, such as n2rng and "software" meaning CPU instructions or some other pure software mechanism. It doesn't mean that there is no "hardware" involved since on Intel CPUs with the RDRAND instruction calls are in the swrand provider but it is regarded as a "software" provider.
2.6.1 swrand: Random Number Provider
All Solaris installs have a KCF random provider called "swrand". This provider periodically collects unpredictable input and processes it into a pool or entropy, it implements its own mixing (distinct from that at the kcf level), extraction and generation algorithms.
It uses a pool called srndpool of 256 bytes and a leftover buffer of 20 bytes.
The swrand provider has two different entropy sources:
1. By reading blocks of physical memory and detecting if changes occurred in the blocks read.
Physical memory is divided into blocks of fixed size. A block of memory is chosen from the possible blocks and hashed to produce a digest. This digest is then mixed into the pool. A single bit from
the digest is used as a parity bit or "checksum" and compared against the previous "checksum" computed for the block. If the single-bit checksum has not changed, no entropy is credited to the pool. If there is a change, then the assumption is that at least one bit in the block has changed. The possible locations within the memory block of where the bit change occurred is used as a measure of entropy.
if a block size of 4096 bytes is used, about log_2(4096*8)=15 bits worth of entropy is available. Because the single-bit checksum will miss half of the changes, the amount of entropy credited to the pool is doubled when a change is detected. With a 4096 byte block size, a block change will add a total of 30 bits of entropy to the pool.
2. By measuring the time it takes to load and hash a block of memory and computing the differences in the measured time.
This method measures the amount of time it takes to read and hash a physical memory block (as described above). The time measured can vary depending on system load, scheduling and other factors. Differences between consecutive measurements are computed to come up with an entropy estimate. The first, second, and third order delta is calculated to determine the minimum delta value. The number of bits present in this minimum delta value is the entropy estimate.
3. Additionally on x86 systems that have the RDRAND instruction we take entropy from there but assume only 10% entropic density from it. If the rdrand instruction is not available or the call to use it fails (CF=0) then the above two entropy sources are used.
184.108.40.206 Initalisation of swrand
Since physical memory can change size swrand registers with the Solaris DR subsystem so that it can update its cache of the number of blocks of physical memory when it either grows or shrinks.
On initial attach the fips_rng_post() function is run.
During initalisation the swrand provider adds entropy from the high resolution time since boot and the current time of day (note that due to the module load system and how KCF providers register these values will always be different from the values that the KCF rndpool is initalised with). It also adds in the initial state of physical memory, the number of blocks and sources described above.
The first 20 bytes from this process are used as the XKEY and are also saved as the initial value of previous_bytes for use with the FIPS 186-2 continuous test.
Only after all of the above does the swrand provider register with the cryptographic framework for both random number generation and seeding of the swrand generator.
220.127.116.11 swrand entropy generation
The swrand_get_entropy() is where all the real work happens when the KCF random pool calls into swrand. This function can be called in either blocking or non blocking mode. The only difference between blocking and non blocking is that the later will return EAGAIN if there is insufficient entropy to generate the randomness, the former blocks indefinitely.
A global uint32_t entropy_bits is used to track how much entropy is available.
When a request is made to swrand_get_entropy() we loop until we have the available requested amount of randomness. First checking if the number of remaining entropy in srndpool is below 20 bytes, if it is then we block waiting for more entropy (or return EGAIN if non blocking mode).
Then determine how many bytes of entropy to extract, it is the minimum of the total requested and 20 bytes. The entropy extracted from the srndpool is then hashed using SHA1 and fed back into the pool starting at the previous extraction point. We ensure that we don't feed the same entropy back into the srndpool at the same position, if we do then the system will force a panic when in FIPS 140 mode or log a warning and return EIO when not in FIPS 140 mode.
The FIPS 186-2 Appendix 3 fips_random_inner() function is then run on that same SHA1 digest and the resulting output checked that each 20 byte block meets the continous RNG test - if that fails we panic or warn as above.
We then update the output buffer and if continue the loop until we have generated the requested about. Before swrand_get_entropy() returns it zeros out the used SHA1 digest and any temp area and releases the srndpool mutex. lock.
18.104.22.168 Adding to the swrand pool
The swrand_seed_random () function is used to add request adding entropy from an external source via the KCF random_add_entropy() call. If is called from KCF (ie something external to swrand itself) synchronously then the entropy estimate is always 0. When called asynchronously we delay adding in the entropy until the next mixing time.
The internal swrand_add_entropy() call deals with updating srndpool it does do by adding and then mixing the bytes while holding the srndpool mutex lock. Thus the pool is always mixed before returning.
22.214.171.124 Mixing the swrand pool
The swrand provider uses the same timeout mechanism for mixing that is described above for the KCF rndpool for adding new entropy to the the srndpool using the sources described above.
The swrand_mix_pool() function is called as a result of the timeout or an explicit request to add more entropy.
To mix the pool we first add in any deferred bytes, then by sliding along the pool in 64 bit chunks hash the data from the start upto this point and the position we are long the pool with SHA1. Then XOR the resulting hash back into the block and move along.
2.6.2 n2rng random provider
This applies only to SPARC processors with either an S2 core (T2, T3, T3+) or to S3 core (T4, T5, M5, M6) both CPU families use the same n2rng driver and the same on chip system for the RNG.
The n2rng driver provides the interface between the hyper-privilged access to the RNG registers on the CPU and KCF.
The driver performs attach time diagnostics on the hardware to ensure it continues operating as expected. It determines that it is operating
in FIPS 140-2 mode via its driver.conf(5) file before its attach routine has completed. The full hardware health check in conjunction with the hypervisor only when running in the control domain. The FIPS 140 checks are always run regardless of the hypervisor domain type. If the FIPS 140 POST checks fail the driver ensures it is deregistered with KCF.
If the driver is suspended and resumed it reconfigures and re-registers with KCF. This would happen on a suspend/resume cycle or during live migration or system reconfiguration.
External seeding of n2rng is not possible from outside of the driver, and it does not provide the seed_random operation to KCF.
This algorithm used by n2rng is very similar to that of swrand, if loops collecting entropy and building up the requested number of bytes checking that each bit of entropy is different from the previous one, applying the fips_random_inner() function and then checking the resulting processed bytes differs from the previous set.
The entropy collection function n2rng_getentropy() is the significant difference between it and swrand in how they provide random data requests to KCF callers.
n2rng_getentropy() returns the requested number of bytes of entropy by uses hypervisor calls to hv_rng_data_read() and providing error checking to ensure we can retry on certain errors but eventually give up after a period of time or number of failed attempts at reading from the hypervisor. The function hv_rng_data_read() is a short fragment of assembler code that reads a 64 bit value from the hypervisor RNG register (HV_RNG_DATA_READ 0x134) and is only called by n2rng_getentropy() and the diagnostic routine called at driver attach and resume time.
3.0 FIPS 186-2: fips_random_inner()
We will discuss this function here because it is common to swrand, n2cp, the /dev/urandom implementation as well as being used in userspace function fips_get_random.
It is a completely internal to Solaris function that can't be used outside of the cryptographic framework.
fips_random_inner(uint32_t *key, uint32_t *x_j, uint32_t *XSEED_j)
It computes a new random value, which is stored in x_j; updates XKEY. XSEED_j is additional input. In principle, we should protect XKEY, perhaps by placing it in non-paged memory, but we aways clobber XKEY with fresh entropy just before we use it. And step 3d irreversibly updates it just after we use it. The only risk is that if an attacker captured the state while the entropy generator was broken, the attacker could predict future values. There are two cases:
- The attack gets root access to a live system. But there is no defense against that that we can place in here since they already have full control.
- The attacker gets access to a crash dump. But by then no values are being generated.
Note that XSEED_j is overwritten with sensitive stuff, and must be zeroed by the caller. We use two separate symbols (XVAL and XSEED_j) to make each step match the notation in FIPS 186-2.
All parameters (key, x_j, XSEED_j) are the size of a SHA-1 digest, 20 bytes.
The HASH function used is SHA1.
The implementation of this function is verified during POST by fips_rng_post() calling it with a known seed. The POST call is performed before the swrand module registers with KCF or during initalisation of any of the libraries in the FIPS 140 boundary (before their symbols are available to be called by other libraries or applications).
This is a software-based generator algorithm that uses the random bits in the cache as a seed. We create one pseudo-random generator (for /dev/urandom) per possible CPU on the system, and use it, kmem-magazine-style, to avoid cache line contention.
4.1 Initalisation of /dev/urandom
kcf_rnd_init() calls rnd_alloc_magazines() which setups up the empty magazines for the pseduo random number pool (/dev/urandom). A separate magazine per CPU is configured up to the maximum number of possible (not available) CPUs on the system, important because we can add more
CPUs after initial boot.
The magazine initalisation discards the first 20 bytes so that the rnd_get_bytes() function will be using that for comparisons that the next block always differs from the previous one. It then places the next 20 bytes into the rm_key and next again 20 bytes into rm_seed. It does this for each max_ncpus magazine. Only after this is complete does kcf_rnd_init() return back to kcf_init(). Each of the per CPU magazines has its own state which includes hmac key, seed and previous value, each also has its own rekey timers and limits.
The magazines are only used for the pseduo random number pool (ie servicing random_get_pseduo_bytes() and /dev/urandom) not for random_get_bytes() or /dev/random.
Note that this usage is preemption-safe; a thread entering a critical section remembers which generator it locked and unlocks the same one; should it be preempted and wind up running on a different CPU, there will be a brief period of increased contention before it exits the critical section but nothing will melt.
4.2 /dev/urandom generator
At a high level this uses the FIPS 186-2 algorithm using a key extracted from the random pool to generate a maximum of 1310720 output blocks before rekeying. Each CPU (this is CPU thread not socket or core) has its own magazine.
4.3 Reading from /dev/urandom
The maximum request size that will be services for a single read(2) system call on /dev/urandom is 133120 bytes.
Reads all come in via the kcf_rnd_get_pseduo_bytes() function.
If the requested size is considered a to be large, greater than 2560 bytes, then instead of reading from the pool we tail call the generator directly by using rnd_generate_pseudo_bytes().
If the CPUs magazine has sufficient available randomness already we use that, otherwise we call the rnd_generate_pseudo_bytes() function directly.
rnd_generate_pseduo_bytes() is always called with the cpu magazine mutex already locked and it is released when it returns.
We loop through the following until the requested number of bytes has been built up or an unrecoverable error occurs.
rm_seed is reinitialised by xoring in the current 64 bit highres time, from gethrtime() into the prior value of rm_seed. The fips_random_inner() call is then made using the current value of rm_key and this new seed.
The returned value from fips_random_inner() is then checked against our previous return value to ensure it is a different 160bit block. If that fails the system panics when in FIPS 140-2 mode or returns EIO if FIPS mode is not enabled.
Before returning from the whole function the local state is zero'd out and the per magazine lock released.
5.0 Randomness for key generation
For asymmetric key generation inside the kernel a special random_get_nzero_bytes() API is provided. It differs from random_get_bytes() in two ways, first calls the random_get_bytes_fips140() function which only returns once all FIPS 140-2 initalisation has been completed. The random_get_bytes() function needs to be available slightly earlier because some very early kernel functions need it (particularly setup of the VM system and if ZFS needs to do any writes as part of mounting the root filesystem). Secondly it ensures that no bytes in the output have the 0 value, those are replaced with freshly extracted additional random bytes, it continues until the entire requested length is entirely made up of non zero bytes.
A corresponding random_get_nzero_pseduo_bytes() is also available for cases were we don't want 0 bytes in other random sequences, such as session keys, nonces and cookies.
The above to functions ensure that even though most of the random pool is available early in boot we can't use it for key generation until the full FIPS 140-2 POST and integrity check has completed, eg on the swrand provider.
6.0 Userspace random number
Applications that need random numbers may read directly from /dev/random and /dev/urandom. Or may use a function implementing
the FIPS 186-2 rng requirements.
The cryptographic framework libraries in userspace provide the following internal functions:
The above functions are available from the libcryptoutil.so library but are Private to Solaris and MUST not be used by any 3rd party code - see the attributes(5) man page for the Solaris interface taxonomy. Similar to the kernel space there are pkcs11_get_nzero_random() and pkcs11_get_nzero_urandom() variants that ensure none of the bytes are zero. The pkcs11_ prefix is because these are Private functions mostly used for the implementation of the PKCS#11 API. The Solaris Private ucrypto API does not provide key generation functions.
The pkcs11_softtoken C_GenerateRandom() function is implemented by calling pkcs11_get_urandom().
When pkcs11_softtoken is performing key generation C_GenerateKey() or C_GenerateKeyPair() it uses pkcs11_get_random for persistent (token) keys and pkcs11_get_urandom() for ephemeral (session) keys.
The above mentioned internal functions generate random numbers in the following way.
While holding the pre_rnd_mutex (which is per userspace process) pkcs11_get_random() reads in 20 byte chunks from /dev/random and calls fips_get_random() on that 20 bytes and continutes a loop building up the output until the caller requested number of bytes are retrived or an unrecoverable error occurs (in that case it will kill the whole process using abort() when in FIPS 140-2 mode).
fips_get_random() performs a continous test by comparing the bytes taken from /dev/random. It then performs a SHA1 digest of those bytes and calls fips_random_inner(). It then again performs the byte by byte continous test.
When the caller requested number of bytes have been read and post processed the pre_rnd_mutex is released and the bytes returned to the caller
The initial seed and XKEY for fips_random_inner() are setup during the initalisation of the libcryptoutil library before the main() of the application is called or any of the functions in libcryptoutil are available. XKEY is setup by feeding the the current high resolution time into seed48() and drand48() functions to create a buffer of 20 bytes that is then digested through SHA1 and becomes the initial XKEY value. XKEY is then updated when fips_random_inner() is called.
pkcs11_get_urandom() follows exactly the same algorithm as pkcs11_get_random() except that the reads are from /dev/urandom instead of /dev/random.
When a userspace program forks pthread_at_fork handlers ensure that requests to retreive randomness are locked out during the fork.
I hope this is useful and/or interesting insight into how Solaris generates randomness.
Update 2013-09-12 I was asked about how this applies to Illumos: To the best of my knowledge [ I have not read the Illumos source the following is based on what I remember of the old OpenSolaris source ] most of what I said above should apply to Illumos as well. The main exceptions are that the fips_random_inner(), POST and some of the continuous checks don't exist, neither does the Intel RDRAND support. The source or the n2rng driver, random(7D), kcf and swrand were available as part of OpenSolaris. Not that Illumos may have changed some of this so please verify for yourself.