New Blog Welcome

Welcome to the WebLogic Server Blog. This blog has been created to provide you the inside story on WebLogic server and related technologies. We will have posts from a number of contributors including product management and development on a variety of interesting topics. In addition, we hope to provide a channel for conversation where you can share your experience in using the product in our never-ending quest to continue to improve our product.

If you plan on attending Oracle Open World, stop by and meet the team at the middleware booth. Also, if you are interested in attending sessions specific to middleware, we’ve created focus tracks by topic that can be found here.


hi Is there a MQ JMS available with weblogic server. can anyone please provide me configuration info on how can i integrate MQ in weblogic App server with a sample application.

Posted by shree harsha on November 17, 2008 at 04:59 PM PST #

Take a look at the following documentation: (see Configuring Foreign Server Resources to Access Third-Party JMS Providers section). There is also sample config in the document for MQ.

Posted by Erik Bergenholtz on November 18, 2008 at 11:44 PM PST #

i was looking for that configuration info for a long time. Thank you very much Erik.

Posted by server on June 26, 2009 at 02:32 AM PDT #

thank you for this article. Ive looked at the end.

Posted by domain kaydi on December 29, 2009 at 03:49 PM PST #

Hi Want the real time weblogic server unix commands

Posted by Rithesh on February 28, 2010 at 07:05 PM PST #

To start JRockit with the deterministic garbage collector, use -Xgcprio:deterministic -Xpausetarget=100ms the pausetarget will be dependent on your requirements as well as constraints of your application.

Posted by Erik Bergenholtz on February 28, 2010 at 11:17 PM PST #

Hi, I would you please give me a link which will have doc for, i want to have 2 instances of weblogic 10.x running on a single server. Regards, Pradyumna.

Posted by Pradyumna on July 13, 2010 at 07:20 PM PDT #

Found your website and decided to have a fast look over, not what a normally do but good 1. Good to see a website for a change that is not jam packed with junk and garbage, and truly makes some sense. Anyway, great page.

Posted by Violeta Millbrand on October 10, 2010 at 05:20 AM PDT #

I feed my dogs Nature's Recipe, it doesn't hurt to switch, it doesn't contain any soy [bad, contains aluminum from processing], wheat, gluten or other by products & is manufactured in the USA. It is a venison & rice blend. Nearly all the foods contain this, I don't trust buying those on the list. Type in "dog food recall" in your search engine & you will get the list, I don't trust the FDA either, they are for big business profits rather than the health of our animals, then they try to turn out to be the heros, look how many people have died from the drug Vioxx, over 10,000, that was approved by the FDA, you would think the pet food industries would quit putting diseased animal parts in their foods. They rather eat our food, & we have switched to organic, I also give them vitamin supplements, glucosamine for their joints & glutamine to keep their muscles strong, they are a large breed, as in the processing of any food neutrients are depleted. I hope this helps. It is a sad day for alot of people when they loose their pet, if you run out of their food try the Nature's Recipe, or boil brown rice & ground beef together or separate, yes, boil the ground meat, this stops any diarhrea, [spell check won't work] too & is a nice change from the norm, organic if finances allow it. Green beans are also filling for them & are reasonably inexpensive, they lose weight on green beans, toss in some bacon grease! Yummy! I love it when I see them smile! You can also take the remaining bag back to the store, & get a credit for another brand.

Posted by Hiram Faigin on November 05, 2010 at 11:02 AM PDT #

Hi, I need to configure clustered weblogic server in two servers using Sun Solaries OS, after that i need to deploy J2EE application in this 2 servers So, I need to configure the cluster if one server down or failed to run the second server must run automatically so that i can browse my web application without any problem thanks

Posted by Ali Elafen on December 18, 2010 at 08:49 PM PST #

please refer to the previous blog , this will be continuing of what I need: 1st server: 1) how many managed server to create, & what the IP should we assigned for each managed server? 2) how many machine to create & which managed server should we terget to each machine? 3) should we activate node manager for each machine? 4)should we create clustered managed server? if yes, what the IP & other configuration? 2nd server: 1)should we create admin server? 2) what the IP assigned for managed server? 3)should we create machine & terget the managed server to this machine? 4) should we activate node manager for the machine? finally, I need to test deployment if 1st server down or failed the 2nd server must run & the deployment must be run without any problems please I need this answers urgently ASAP.

Posted by Ali Elafen on December 18, 2010 at 09:44 PM PST #

Hands down, Apple's app store wins by a mile. It's a huge selection of all sorts of apps vs a rather sad selection of a handful for Zune. Microsoft has plans, especially in the realm of games, but I'm not sure I'd want to bet on the future if this aspect is important to you. The iPod is a much better choice in that case.

Posted by Latest Gadget News on February 02, 2011 at 06:56 PM PST #

Definitely believe that which you said. Your favorite reason appeared to be on the internet the easiest thing to be aware of. I say to you, I certainly get annoyed while people consider worries that they plainly don't know about. You managed to hit the nail upon the top and defined out the whole thing without having side effect , people can take a signal. Will likely be back to get more. Thanks

Posted by posicionamiento google on February 03, 2011 at 07:04 AM PST #

How long did it take you to write this? This is Absolutely fantastic.

Posted by Gearldine Behnke on February 03, 2011 at 11:48 AM PST #

Love all the opinions expressed here! How is everyone? :)

Posted by Thea Amyotte on February 03, 2011 at 04:32 PM PST #

Whats hattnin, yeuh dis blog right heur is ill, big ups PAAAATNAAAA.

Posted by Link building on March 01, 2011 at 05:35 AM PST #

This is the best blog I've ever seen in my life! I really appreciate you taking the time out of your day to share this with everyone.

Posted by Backlinks on March 02, 2011 at 11:39 PM PST #

Very nice blog.I like this and will come back very soon.

Posted by Burton Haynes on March 06, 2011 at 08:59 AM PST #

Thanks for the previous remarks! too long caught up in dieting but gained much from your post and I have already lost 22kg. Regards, John My site

Posted by Bodybuilder on March 09, 2011 at 02:11 AM PST #

Dear Support, I am getting the below error while running with Weblogic 10.3, it is working fine with JBOSS server, please suggest. java.lang.ClassCastException: weblogic.xml.saaj.NameImpl cannot be cast to at weblogic.webservice.core.soap.SOAPElementImpl.getChildElements( at Source) at Source) at javax.servlet.http.HttpServlet.service( at javax.servlet.http.HttpServlet.service( at weblogic.servlet.internal.StubSecurityHelper$ at weblogic.servlet.internal.StubSecurityHelper.invokeServlet( at weblogic.servlet.internal.ServletStubImpl.execute( at weblogic.servlet.internal.ServletStubImpl.execute( at weblogic.servlet.internal.WebAppServletContext$ at at at weblogic.servlet.internal.WebAppServletContext.securedExecute( at weblogic.servlet.internal.WebAppServletContext.execute( at at at please see the below code SOAPFactory factory = SOAPFactory.newInstance( ); if ( log.isDebugEnabled( ) ) { log.debug( body.toString( ) ); } long trxnProcId = 0; //Parse the trxn-no SOAPBodyElement bodyEle = ( SOAPBodyElement ) body.getChildElements( ).next( ); Iterator itr = bodyEle.getChildElements( factory.createName( "trxn-no" ) ); THanks in advance. Ravi Kumar.

Posted by Ravi Kumar Kotapati on March 10, 2011 at 04:43 PM PST #

Post a Comment:
  • HTML Syntax: NOT allowed

The official blog for Oracle WebLogic Server fans and followers!

Stay Connected


« October 2015